Magnetic Pole Detector - Identifier - Tester

N48 magnets, stronger than N45, N42 Pull Force: over 2.1 lbs Magnetized through 1/8"

Pull Force: 3.7 lbs Gold coated

N42 magnets, stronger than N40 Pull Force: 4.2 lbs

Pull Force: 2.4 lbs. Magnetized through 1/8" Nickel-Copper-Nickel coated

pull force: 2.7 lbs Magnetized through 1/16"

Pull Force: 5 lbs Nickel-Copper-Nickel coated Magnetized through 0.25"

N45 magnets stronger than N42 pull force: 4 lbs Magnetized through 1/8"

Magnetized through 1/4" Pull Force: 6.6 lbs

N48 magnets, stronger than N45 Magnetized through 1/4" Pull Force: 7.9 lbs

N52 magnets, stronger than N50 Pull Force: 8.9 lbs Magnetized through 1/4"

Magnetized through 1/2" length Pull force: 15 lbs

Strong N52 magnets, stronger than N50 Magnetized through 1/2" length Pull force: 16 lbs

Magnetized through 1" length Pull force: 24 lbs

Stronger than N40 Magnetized through thickness 3/8" Pull force: 16.5 lbs

N52 magnets, stronger than N50 Magnetized through thickness 3/8" Pull force: 19 lbs

N45 magnets, stronger than N42 pull force: over 5 lbs

pull force: 2 lbs Magnetized through 1/16"

Stronger than N42 pulling force: 3.5 lbs Magnetized through 1/16"

Magnetized through 1/4" pull force: 7 lbs Make Traffic Lights Aware With Magnets - Good for Motorcycles, Scooters & Bicycles. Works for some fast food drive up windows too!

Magnetized through 1/8" 6.5 lb pull force

pulling force: 11 lbs Magnetized through 1/4"

N45 magnets, stronger than N42 pulling force: 7.7 lbs Magnetized through 1/8"

N52 magnets, stronger than N50 pulling force: 9.2 lbs Magnetized through 1/8"

pull force: 15 lbs Magnetized through 1/4"

pull force: over 13 lbs Magnetized through thickness 1/4"

pulling force: more than 27 lbs Magnetized through 1/2"

N50 magnets, stronger than N48 pull force: over 32 lbs Magnetized through 1/2"

N52 magnets, stronger than N50 pull force: over 32.5 lbs Magnetized through 1/2"

1/8" hole perpendicular to magnetized direction N52 magnets, stronger than N50 pulling force: 34 lbs and up magnetized perpendicular to 1/8 inch hole direction

Neodymium N52 magnets, stronger than N50 1/8" hole parallel to magnetization direction pull force: 34 lbs and up Magnetized through 1/2"

Magnetized through 1" thickness Pull force: 30 lbs

Pull Force: 60 lbs Magnetized through thickness 2", poles at the ends

Pull Force: over 4.5 lbs Magnetized through 1/8"

Pull Force: over 9 lbs Magnetized through 1/4"

Magnetized through 1/2" pull force: 24 lbs

Strong N52 magnets, stronger than N50 Magnetized through 1/2" Pull force: 25 lbs

Pull Force: over 9 lbs Magnetized through 1/8"

N48 magnets, stronger than N45 pull force: 19 lbs Magnetized through 1/4"

N52 magnets, stronger than N50 pull force: 20 lbs Magnetized through 1/4"

Magnetized through thickness 1/8" pull force: over 20 lbs

Strong N52 magnets, stronger than N50 Magnetized through thickness 1/8" pull force: over 23 lbs

Work with #8 screws pull force: over 10 lbs Magnetized through thickness 1/8"

pull force: 26 lbs Magnetized through 1/4"

pull force: over 20 lbs Magnetized through thickness 1/4"

Magnetized through thickness 3/8" pull force: over 33 lbs

Magnetized through thickness 3/4" Pull force: 62 lbs and up

N48 magnets, stronger than N45, N42 Magnetized through thickness 3/4" Pull force: over 70 lbs

N52 magnets, stronger than N50 Magnetized through thickness 3/4" Pull force: over 76 lbs.

N45 magnets, stronger than N42 Magnetized through 1/16" Pull force: 4.5 lbs

N52 magnets, stronger than N50 Pull Force: over 5 lbs Magnetized through 1/16"

Pull Force: 7.5 lbs Magnetized through 1/8"

Pull Force: 8 lbs Magnetized through 1/8"

Pull Force: 13.5 lbs Magnetized through 1/4"

N52 magnets, stronger than N50 Pull Force: 16 lbs Magnetized through 1/4"

N48 magnets, stronger than N45 Pull Force: 6 lbs Magnetized through 1/16"

N45 magnets, stronger than N42 Pull Force: 12 lbs Magnetized through 1/8"

N50 magnets, stronger than N48 Pull Force: 12.5 lbs Magnetized through 1/8"

N52 magnets, stronger than N50 Pull Force: 13 lbs Magnetized through 1/8"

300 degree F temperature rating Pull Force: 11 lbs Nickel-Copper-Nickel 3 layer coated Magnetized through 1/8"

N45 magnets, stronger than N42 pulling force: over 12 lbs Magnetized through thickness 1/8"

Pull force: over 11 lbs Magnetized through thickness 1/8"

N48 magnets, stronger than N45, N42 Pull force: over 12 lbs Magnetized through thickness 1/8"

Magnetized through 1/4" Pull Force: 19 lbs

Each hole is countersunk on both sides. pull force: over 19 lbs Magnetized through thickness 1/4"

0.29 inch x 0.155 inch 82 degree countersunk hole on both sides. pull force: over 19 lbs Magnetized through thickness 1/4"

Strong N52 magnets, stronger than N50 Magnetized through 1/4" Pull Force: over 21 lbs

300 degree F temperature rating Pull Force: 19 lbs Nickel-Copper-Nickel 3 layer coated Magnetized through 1/4"

Pull Force: 39 lbs Magnetized through 1/2"

Two countersunk holes on each magnet Each hole is countersunk on both sides N42 -Stronger than N40, N38 and N35 Pull Force: 37 lbs Magnetized through 1/2"

One countersunk hole on each magnet, center hole is countersunk on both sides N42 - Stronger than N40, N38 and N35 Pull Force: 37 lbs Magnetized through 1/2" Magnetized through 1/2"

300 degree High Temperature N42SH Rare Earth Pull Force: 37 lbs Magnetized through 1/2"

Pull Force: 40 lbs Magnetized through 1/2"

Pull Force: over 25 lbs Magnetized through 1/8"

N52magnets, stronger than N50 Pull Force: over 28 lbs Magnetized through 1/8"

Magnetized through 3/16" Pull Force: 26 lbs

Two countersunk holes on each magnet Each hole is countersunk on both sides Magnetized through 3/16" Pull Force: 26 lbs

Magnetized through 1/4" Pull force: 28 lbs ON SALE !

N50 magnets, stronger than N48 300 degree High Temperature N50SH Rare Earth Pull force: over 33 lbs Magnetized through 1/4"

Magnetized through 1/4" Pull force: over 36 lbs

0.36x0.195" countersunk hole for #8 screw pull force: over 28 lbs Magnetized through thickness 1/4"

N42 magnets, stronger than N40 Magnetized through 3/8" Pull force: over 38 lbs ON SALE !

N50 magnets, stronger than N48 Pull Force: over 45 lbs Magnetized through 3/8"

Pull Force: 52 lbs Magnetized through 1/2"

N45 magnets, stronger than N42 Pull Force: over 54 lbs Magnetized through 1/2"

N52 magnets, stronger than N50 Pull Force: over 62 lbs Magnetized through 1/2"

N45 magnets, stronger than N42 pulling force: over 55 lbs Magnetized through thickness 1/2"

Pull Force: 135 lbs Magnetized through 1"

Pull Force: 150 lbs Magnetized through 1"

Pull Force: 180 lbs Magnetized through 1.5"

Pull Force: 210 lbs Magnetized through 2"

Magnetized through 1/16" Pull Force: over 7 lbs

N48 magnets, stronger than N45 Magnetized through 1/8" Pull Force: over 14 lbs

Magnetized through 1/8" Pull Force: over 15 lbs N52 Magnets, stronger than N50

Magnetized through 1/4" Pull Force: over 26 lbs

pull force: over 24 lbs each hole is countersunk on both sides Magnetized through thickness 1/4"

Magnetized through 1/4" Pull Force: 30 lbs

N50 magnets, stronger than N48 300 degree High Temperature N50SH Rare Earth Pull Force: 30 lbs Magnetized through 1/4"

N52 magnets, stronger than N50 Magnetized through 1/4" Pull Force: 35 lbs

Two countersunk holes on each magnet Each hole is countersunk on both sides Magnetized through 3/8" Pull Force: over 43 lbs

N45 magnets, stronger than N42 Magnetized through 1/2" Pull Force: over 55 lbs

N52 magnets, stronger than N50 Magnetized through 1/2" Pull Force: over 62 lbs

Pull Force: over 38 lbs Magnetized through 1/4

N45 magnets, stronger than n42 Pull Force: over 46 lbs Magnetized through 1/4"

N45 magnets, stronger than N42 Pull Force: 160 lbs Magnetized through 1"

Pull force: 5 lbs Magnetized through thickness 1/16"

Pull force: 9.5 lbs Magnetized through thickness 1/8"

Pull force: 19 lbs Magnetized through thickness 1/4"

N45 magnets, stronger than N42 pulling force: 8 lbs Magnetized through 1/16"

Pull force: over 15 lbs Magnetized through thickness 1/8"

N45 magnets, stronger than N42 Pull force: over 16 lbs Magnetized through thickness 1/8"

N52 magnets, stronger than N50 Pull force: over 18 lbs Magnetized through thickness 1/8"

300 degree F temperature rating Pull Force: 13 lbs Magnetized through 1/8"

Pull Force: over 27 lbs Magnetized through thickness 1/4"

N52 magnets, stronger than N52, N48, N45, N42 Pull Force: over 30 lbs Magnetized through thickness 1/4"

Pull force: over 28 lbs Magnetized through thickness 1/4"

Pull force: over 28 lbs Each hole is countersunk on both sides Magnetized through thickness 1/4"

N48 magnets, stronger than N45, N42 Pull Force: over 60 lbs Magnetized through thickness 1/2"

N52 magnets, stronger than N50, N48 Pull Force: over 63 lbs Magnetized through thickness 1/2"

Pull Force: over 55 lbs Magnetized through thickness 1/2"

N52 magnets, stronger than N50 Pull force: over 23 lbs Magnetized through thickness 1/8"

Pull Force: over 13 lbs Grade N45, stronger than N42

Pull Force: over 24 lbs Grade N45, stronger than N42

Pull Force: over 48 lbs Magnetized through thickness 1/4"

N52 magnets, stronger than N50 Pull Force: 54 lbs Magnetized through thickness 1/4"

Two 0.36x0.18" countersunk hole for #6/#8 screw pull force: over 46 lbs Magnetized through thickness 1/4"

N48 magnets, stronger than N45, N42 Two 0.365"x0.195" dual countersunk Holes for #8 screw pull force: over 54 lbs Magnetized through thickness 1/4"

Best corrosion-resistant coating Epoxy + Copper + Nickel 3-layer coating Pull Force: over 59 lbs Magnetized through 3/8

N48 magnets, stronger than N45, N42 Pull Force: over 65 lbs Magnetized through 3/8

Superior corrosion-resistant Epoxy + Copper + Nickel 3-layer coating N42 magnets, stronger than N40, N38 Dual Sided Countersunk hole fits #8 metal screws Pull Force: over 72 lbs

N42 magnets, stronger than N40, N38 Dual Sided Countersunk hole fits #8 metal screws Pull Force: over 72 lbs

N50 magnets, stronger than N48, N45, N42, N40, N38 and N35 Each hole is countersunk on both sides. pull force: over 87 lbs Magnetized through thickness 1/2"

N52 magnets, stronger than N50, N48, N45, N42, N40, N38 and N35 Each hole is countersunk on both sides. pull force: over 89 lbs Magnetized through thickness 1/2"

Hugh Piggott's wind generator Pull Force: more than 72 lbs Magnetized through 0.5"

Better corrosion-resistant Epoxy + Copper + Nickel 3-layer coating than NiCuNi, Hugh Piggott's Wind Generator Pull Force: 72 lbs Magnetized through 1/2

N50 magnets, stronger than N48 Pull Force: more than 87 lbs Magnetized through 0.5"

Better corrosion-resistant Epoxy + Copper + Nickel 3-layer coating than NiCuNi. Grade N50, stronger than N48 Hugh Piggott's Wind Generator Pull Force: 87 lbs Magnetized through 1/2

N52 magnets, stronger than N50 Pull Force: over 91 lbs Magnetized through 1/2"

N42 magnets, stronger than N40, N38 Dual Sided Countersunk hole fits #8 metal screws Pull Force: over 72 lbs Hugh Piggott's wind turbine Magnetized through the 0.5"

Dual Sided Counter sunk holeworks with #8 or #10 screws N50 magnets, stronger than N48 Hugh Piggott's Wind Generator Pull Force: 87 lbs Magnetized through 1/2

Dual Sided Counter sunk hole fits with #8 metal screws N52 magnets, stronger than N50 Hugh Piggott's Wind Generator Pull Force: over 90 lbs Magnetized through 1/2

Best corrosion-resistant coating Epoxy + Nickel + Copper + Nickel 4-layer coating Dual Sided Counter sunk center hole fits with #6 metal screws Grade N42, stronger than N40/N38/N35 Pull Force: 72 lbs Hugh Piggott's Wind Generator Magnetized throu

N52 magnets, stronger than N50 Pull Force: over 91 lbs Magnetized through 1/2"

Grade N52 stronger than N50 Best corrosion-resistant coating Epoxy + Copper + Nickel 3-layer coating Counter sunk center hole fits with #8 metal screws Hugh Piggott's Wind Generator Pull Force: 92 lbs Magnetized through 1/2

Pull Force: more than 72 lbs Magnetized through 2"

Hugh Piggott's wind generator Pull Force: 120 lbs Best performance/cost ratio Magnetized through 3/4"

N52 magnets, stronger than N50, N48, N45, N42, N40 and N35 Pull Force: over 147 lbs Magnetized through 3/4"

Pull Force: over 145 lbs Magnetized through 1"

N52 Grade, stronger than N50 Pull Force: over 165 lbs Magnetized through 1"

Pull Force: 52 lbs Magnetized through thickness 1/4"

N48 magnets, stronger than N45, N42 Pull Force: over 57 lbs Magnetized through thickness 1/4"

Pull Force: 105 lbs Magnetized through thickness 1/2"

N50 magnets, stronger than N48 Pull Force: over 130 lbs Magnetized through thickness 1/2"

N52 magnets, stronger than N50, N48, N45, N42, N40, N38 and N35 Pull Force: over 145 lbs Magnetized through thickness 1/2"

Pull Force: over 202 lbs Magnetized through thickness 1"

N42 magnets, stronger than N40 pull force: over 200 lbs 0.47"x0.195" countersunk hole Magnetized through thickness 1"

Pull Force: over 250 lbs Magnetized through thickness 1"

N50 magnets, stronger than N48 pull force: over 250 lbs 0.365"x0.195" countersunk hole Magnetized through thickness 1"

N52 magnets, stronger than N50 Pull Force: over 260 lbs Magnetized through 1" thickness

Pull Force: 420 lbs Magnetized through 2"

N52 magnets, stronger than N50 Pull Force: 490 lbs Magnetized through 2"

Pull Force: 22 lbs Magnetized through 2 inch thickness

pull force: 20 lbs Magnetized through thickness 5/16"

N48 magnets, stronger than n45, N42 Pull Force: over 90 lbs Magnetized through thickness 3/8"

165 lbs pull force magnets for 3kw wind turbine Magnetized through thickness 3/4"

Over 166 lbs pull force magnets for 3kw wind turbine Magnetized through thickness 3/4"

Neodymium NdFeB N42 pulling force: over 12 lbs Magnetized through thickness 1/8"

Neodymium NdFeB N52 pulling force: over 14 lbs Magnetized through thickness 1/8"

N45 magnets, stronger than N42 pull force: over 35 lbs Magnetized through thickness 1/4"

N48 magnets, stronger than N45 pull force: over 35 lbs Magnetized through thickness 1/4"

N52 magnets, stronger than N50 pull force: over 38 lbs Magnetized through thickness 1/4"

N52 magnets, stronger than N50 Pull Force: over 70 lbs Magnetized through thickness 1/2"

pull force: over 60 lbs Magnetized through thickness 1/4"

pull force: over 105 lbs Grade N45, stronger than N42 Magnetized through thickness 1/2"

Grade N52, pull force: over 115 lbs Magnetized through thickness 1/2"

N50 magnets, stronger than N48, N45, N42, N40, N38 and N35. pull force: more than 350 lbs Magnetized through thickness 1"

pull force: 504 lbs

pull force: more than 39 lbs Magnetized through thickness 1/4"

N52 magnets, stronger than N50 pull force: more than 42 lbs Magnetized through thickness 1/4"

Strong N45 magnets, stronger than N42 pull force: over 75 lbs Magnetized through thickness 1/2"

N48 magnets, stronger than N42 pull force: 80 lbs Magnetized through thickness 1/2"

N52 magnets, stronger than N50 pull force: 85 lbs Magnetized through thickness 1/2"

pull force: over 75 lbs Magnetized through thickness 1/4"

pulling force: over 110 lbs Magnetized through thickness 1/2"

Grade N52, stronger than N50 Pull force: 136 lbs

pull force: over 220 lbs Magnetized through thickness 1"

N52 magnets, stronger than N50 pull force: more than 245 lbs Magnetized through thickness 1"

pull force: around 290 lbs

pull force: 350 lbs Magnetized through thickness 1"

N48 magnets, stronger than N45, N42 pull force: over 710 lbs Magnetized through thickness 2"

Pull force: over 700 lbs Magnetized through thickness 1"

pulling force: 28 lbs Magnetized through thickness 5/16"

pull force: over 375 lbs Magnetized through thickness 1/2"

Strong Industrial Magnets pull force: over 580 lbs Magnetized through thickness 1"

pull force: over 720 lbs Magnetizedthrough thickness 1"

pull force: 1000 lbs Magnetized through thickness 1"

pull force: more than 1300 lbs Magnetized through thickness 2"

New design with stronger magnetic force and safer operation

This permanent lifting magnet brute gets your lifting needs done easily and without electricity. SPECIAL FACTORY PURCHASE !!

This permanent lifting magnet brute gets your lifting needs done easily and without electricity. SPECIAL FACTORY PURCHASE !!

This permanent lifting magnet brute gets your lifting needs done easily and without electricity. SPECIAL FACTORY PURCHASE !!

This permanent lifting magnet brute gets your lifting needs done easily and without electricity. SPECIAL FACTORY PURCHASE !!