Magnetic Pole Detector - Identifier - Tester

Work with #8 screws pull force: over 10 lbs Magnetized through thickness 1/8"

pull force: over 20 lbs Magnetized through thickness 1/4"

N45 magnets, stronger than N42 pulling force: over 12 lbs Magnetized through thickness 1/8"

Pull force: over 11 lbs Magnetized through thickness 1/8"

Each hole is countersunk on both sides. pull force: over 19 lbs Magnetized through thickness 1/4"

0.29 inch x 0.155 inch 82 degree countersunk hole on both sides. pull force: over 19 lbs Magnetized through thickness 1/4"

Two countersunk holes on each magnet Each hole is countersunk on both sides N42 -Stronger than N40, N38 and N35 Pull Force: 37 lbs Magnetized through 1/2"

One countersunk hole on each magnet, center hole is countersunk on both sides N42 - Stronger than N40, N38 and N35 Pull Force: 37 lbs Magnetized through 1/2" Magnetized through 1/2"

Two countersunk holes on each magnet Each hole is countersunk on both sides Magnetized through 3/16" Pull Force: 26 lbs

0.36x0.195" countersunk hole for #8 screw pull force: over 28 lbs Magnetized through thickness 1/4"

N45 magnets, stronger than N42 pulling force: over 55 lbs Magnetized through thickness 1/2"

pull force: over 24 lbs each hole is countersunk on both sides Magnetized through thickness 1/4"

Two countersunk holes on each magnet Each hole is countersunk on both sides Magnetized through 3/8" Pull Force: over 43 lbs

Pull force: over 28 lbs Magnetized through thickness 1/4"

Pull force: over 28 lbs Each hole is countersunk on both sides Magnetized through thickness 1/4"

Two 0.36x0.18" countersunk hole for #6/#8 screw pull force: over 46 lbs Magnetized through thickness 1/4"

N48 magnets, stronger than N45, N42 Two 0.365"x0.195" dual countersunk Holes for #8 screw pull force: over 54 lbs Magnetized through thickness 1/4"

Best corrosion-resistant coating Epoxy + Nickel + Copper + Nickel 4-layer coating Dual Sided Counter sunk center hole fits with #6 metal screws Grade N42, stronger than N40/N38/N35 Pull Force: 72 lbs Hugh Piggott's Wind Generator Magnetized

N42 magnets, stronger than N40, N38 Dual Sided Countersunk hole fits #8 metal screws Pull Force: over 72 lbs Hugh Piggott's wind turbine Magnetized through the 0.5"

N50 magnets, stronger than N48, N45, N42, N40, N38 and N35 Each hole is countersunk on both sides. pull force: over 87 lbs Magnetized through thickness 1/2"

Dual Sided Counter sunk holeworks with #8 or #10 screws N50 magnets, stronger than N48 Hugh Piggott's Wind Generator Pull Force: 87 lbs Magnetized through 1/2

Grade N52 stronger than N50 Best corrosion-resistant coating Epoxy + Copper + Nickel 3-layer coating Counter sunk center hole fits with #8 metal screws Hugh Piggott's Wind Generator Pull Force: 92 lbs Magnetized through 1/2

Dual Sided Counter sunk hole fits with #8 metal screws N52 magnets, stronger than N50 Hugh Piggott's Wind Generator Pull Force: over 90 lbs Magnetized through 1/2

N42 magnets, stronger than N40 pull force: over 200 lbs 0.47"x0.195" countersunk hole Magnetized through thickness 1"

N50 magnets, stronger than N48 pull force: over 250 lbs 0.365"x0.195" countersunk hole Magnetized through thickness 1"

N48 magnets, stronger than N45 pull force: over 35 lbs Magnetized through thickness 1/4"

Pull force: 3.5 lbs Magnetized through 1/8"

Pull force: 6.5 lbs Magnetized through 1/8" thickness

N48 magnets, stronger than N45, N42 Pull force: over 7 lbs Magnetized through 1/8" thickness

N45 magnets, stronger than N42 Pull force: 13 lbs Magnetized through 1/4" thickness

N42 magnets, stronger than N35 0.29x0.155" countersunk for #6 screws pulling force: over 6 lbs Magnetized through thickness 1/8"

N42 magnets, stronger than N35 0.29x0.155" countersunk for #6 screws pulling force: over 16 lbs Magnetized through thickness 1/4"

Work with #4 screw Pull force: 8.8 lbs Magnetized through 1/8" thickness

Work with #6 screws Pull force: 8.8 lbs Magnetized through 1/8" thickness

Work with #8 flat head screws Pull force: over 10 lbs

N42 magnets, stronger than N35 0.29x0.155" countersunk for #6 screws pulling force: over 18 lbs Magnetized through thickness 1/4"

Works with #8 screw Pull force: over 33 lbs Magnetized through thickness 1/2"

pull force: over 14 lbs Magnetized through thickness 1/8"

pull force: over 20 lbs Magnetized through thickness 1/4"

Pull force: over 17 lbs Magnetized through thickness 1/8"

Pull force: over 16 lbs Magnetized through thickness 1/8"

Countersunk hole on one side of the magnet. Fits #8 screw Pull force: over 18 lbs Magnetized through 3/16"

Pull force: 24 lbs Magnetized through 1/4"

Pull force: over 49 lbs Magnetized through thickness 1/2"

pull force: over 32 lbs countersunk holes on both sides for #8 screw. Magnetized through 1/4"

pull force: over 32 lbs countersunk holes on both sides for #8 screw. Magnetized through 1/4"

Pull force: over 69 lbs countersunk holes on both sides for #8 screw. Magnetized through 3/8"

N42 Magnets, stronger than N40 Pull force: 115 lbs Magnetized through 1/2"