Neodymium Magnets With Countersunk Holes

N42 Neodymium Magnet 2 x 1/2 x 1/4 inch Dual Side Countersunk Hole

Neodymium Magnets N42 Strong Rare Earth Magnets 2" x 1/2" x 1/4" Thick with countersunk center hole 0.29 inch x 0.155 inch 82 degree tapered hole countersunk hole works with #6 flat head screw Dual sided tapered counter sunk center hole on both sides...

Neodymium Magnets 2 x 1/2 x 1/4 inch Bar w/2 Countersunk Holes N42

N42 Neodymium Magnets with two countersunk holes 2 inch x 1/2 inch x 1/4 inch Thick Strong Rare Earth Bar Magnets There are two countersunk holes on each magnet, each hole is tapered on both sides of the magnet. 0.25 inch x 0.125 inch 90 degree...

Neodymium Magnets 2 in x 1 in x 1/4 in Bar w/2 Countersunk Holes

Neodymium Magnets with two countersunk holes 2 inch x 1 inch x 1/4 inch Thick Strong Rare Earth Bar Magnets There are two countersunk holes on each magnet, each hole is tapered on both sides of the magnet.. Measurement from hole center to hole...

N48 Neodymium Magnets 2 in x 1 in x 1/4 in Bar w/2 Countersunk Holes

N48 Neodymium Magnets with two dual countersunk holes 2 inch x 1 inch x 1/4 inch Thick Strong Rare Earth Bar Magnets There are two countersunk holes on each magnet, each hole is tapered on both sides of the magnet. Holes are 1" apart - center to...

N42 Neodymium Magnets 2 in x 1 in x 1/2 in Bar w/2 Dual Countersunk Holes

N42 Neodymium Magnets with two countersunk holes on both sides 2 inch x 1 inch x 1/2 inch Thick Strong Bar Magnets There are two countersunk holes on each magnet, each hole is tapered 82 degrees on both sides. 0.355 inch x 0.195 inch tapered hole...

N50 Neodymium Magnets 2 in x 1 in x 1/2 in Bar w/2 Countersunk Holes

N50 Neodymium Magnets with two countersunk holes 2 inch x 1 inch x 1/2 inch Thick Strong Bar Magnets There are two countersunk holes on each magnet, each hole is tapered on both sides. 0.365 inch x 0.195 inch 82 degree tapered hole countersunk holes...

N52 Neodymium Magnets 2 in x 1 in x 1/2 in Bar w/2 Countersunk Holes

N52 Neodymium Magnets with two countersunk holes 2 inch x 1 inch x 1/2 inch Thick Strong Bar Magnets There are two countersunk holes on each magnet, each hole is tapered on both sides. 0.355 inch x 0.195 inch 82 degree tapered hole countersunk holes...

Neodymium Magnets 2 in x 1 in x 1/2 in Block #8 Dual Sided Countersunk

Neodymium Magnets N42 Strong Rare Earth Magnets 2" x 1" x 1/2" Thick with dual sided countersunk center hole 0.365 inch x0.195 inch countersunk center hole fits with #8 metal screws Dual sided tapered countersunk center hole on both sides of magnet...

N52 Neodymium 2 in x 1 in x 1/2 in #8 DualSide CounterSunk Hole Magnet

N52 Neodymium Magnet 2" x 1" x 0.5" Thick Rare Earth Magnets with countersunk hole 0.365 inch x0.195 inch countersunk center hole fits with #8 metal screws Dual sided tapered countersunk center hole on both sides of magnet to recess a screw head. ...

N42 EpoxyNiCuNi 2 in x 1 in x 1/2 in w/CounterSunk Hole Neodymium Magnet

Neodymium Magnet 2 inch x 1 inch x 0.5 inch Thick Rare Earth NdFeB Magnet Grade N42, 20% stronger than N35 0.25" x 0.14" 90 degree Dual Sided countersunk center hole on both sides of magnet to recess a #6 flat head screw head. Grade N42 is the...

N52 Magnets 2 in x 1 in x 1/2 in w/Dual Side CounterSunk Hole Epoxy

N52 Magnets 2" x 1" x 0.5" Thick Neodymium NdFeB Block Rare Earth Magnet with tapered countersunk hole Extremely durable Epoxy + Copper + Nickel Triple Layer Coated with tapered center hole Tapered counter sunk center hole on both sides of magnet to...

N42 Neodymium Magnets 2 in x 2 in x 1 in w/Dual Sided Countersunk Hole

N42 Strong Neodymium Magnets 2 inch x 2 inch x 1 inch thick with countersunk center hole Block Rare Earth Magnets 0.42" x 0.22" countersunk hole 82 degree tapered hole countersunk hole works with #10 flat head screws Dual Sided Tapered counter...

Neodymium Magnets N50 2 in x 2 in x 1 in w/Dual Sided Countersunk Hole

Neodymium Magnets N50 Strong 2 inch x 2 inch x 1 inch thick with countersunk center hole Block Rare Earth Magnets 0.365 inch x 0.195 inch 90 degree tapered hole countersunk hole works with #8 or #10 flat head screws Dual Sided Tapered counter...